1. A square prism 35mm sides of base and
60mm axis length rests on HP on one of its edges of the base. Draw the
projections of the prism when the axis is inclined to HP at 450 and
to VP at 300.
2. A square pyramid of base sides 30 mm
and height 60 mm is suspended by a thread tied to one of the corners of its base.
It is then tilted such that the axis makes an angle of 450 with
respect to the VP. Considering the apex of the solid to be nearer to the
observer, draw the projections of the solid.
3. A pentagonal pyramid 25 mm sides of
base and 50 mm axis length rests on HP on one of its slant edges. Draw the
projections of the pyramid when the axis appears to be inclined to VP at 450.
4. A pentagonal prism 25 mm sides of base
and 50 mm axis length is suspended freely from a corner of its base. Draw the
projections of the prism when the axis appears to be inclined to VP at 450.
5. A hexagonal pyramid 25 mm sides of
base and 50 mm axis length rests on HP on one of its edges of the base which is inclined
to VP at 300. Draw the projections of the pyramid when the axis is
inclined to HP at 450.
6. A hexagonal prism 25 mm sides of base
and 50 mm axis length rests on HP on one of its corners of the base such that
the two base edges containing the corner on which it rests make equal
inclinations with HP. Draw the projections of the prism when the axis of the
prism is inclined to HP at 400 and to VP at 300.
7. A hexagonal pyramid 25 mm sides of
base and 50 mm axis length rests on HP on one of its slant triangular faces.
Draw the projections of the pyramid when the axis is inclined to VP at 450.
8. A cone of 50 mm base diameter and 60 mm
axis length rests on HP on one of its generators. Draw its projections when the
axis is inclined to VP at 300.
9. A tetrahedron of sides 40 mm is
resting on one of its sides on HP. This side is parallel to VP and 40mm away
from it. It is tilted about resting side such that the base containing this
edge is inclined at 300 to HP. Draw the projections of the solid.
10. A cube of 40 mm sides rests on HP on
an edge which is inclined to VP at 300. Draw the projections when
the lateral square face containing the edge on which it rests makes an angle of
500 to HP.
This comment has been removed by the author.
ReplyDeleteQuestion with solutions
ReplyDelete